9 votos

Aaron Digulla avatar

Muchos "errores de entrada/salida" después de conectar el Samsung Galaxy S2 por USB

Preguntado el 11 de Enero, 2012
Cuando se hizo la pregunta
1115 visitas
Cuantas visitas ha tenido la pregunta
3 Respuestas
Cuantas respuestas ha tenido la pregunta
Resuelta
Estado actual de la pregunta

Estoy intentando conectar mi Samsung Galaxy S2 (GT-9100, Android 2.3.4, I9100XXKI1) con mi caja Linux (Ubuntu 11.10 oneiric).

Estoy utilizando el modo de almacenamiento USB (Ajustes ➔ Inalámbrico y red ➔ Utilidades USB).

El dispositivo es reconocido y dos nodos del dispositivo en /dev se crean.

En el syslog, veo esta salida:

sd 9:0:0:1: [sdh] 62325760 512-byte logical blocks: (31.9 GB/29.7 GiB)
 sdh:
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
sd 9:0:0:1: [sdh] Media Changed
sd 9:0:0:1: [sdh]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 9:0:0:1: [sdh]  Sense Key : Unit Attention [current] 
sd 9:0:0:1: [sdh]  Add. Sense: Power on, reset, or bus device reset occurred
sd 9:0:0:1: [sdh] CDB: Read(10): 28 20 00 00 04 c8 00 00 08 00
end_request: I/O error, dev sdh, sector 1224
quiet_error: 98 callbacks suppressed
Buffer I/O error on device sdh, logical block 153
 sdh:
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
sd 9:0:0:1: [sdh] Media Changed
sd 9:0:0:1: [sdh]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 9:0:0:1: [sdh]  Sense Key : Unit Attention [current] 
sd 9:0:0:1: [sdh]  Add. Sense: Power on, reset, or bus device reset occurred
sd 9:0:0:1: [sdh] CDB: Read(10): 28 20 00 00 04 90 00 00 48 00
end_request: I/O error, dev sdh, sector 1168
Buffer I/O error on device sdh, logical block 146
Buffer I/O error on device sdh, logical block 147
Buffer I/O error on device sdh, logical block 148
Buffer I/O error on device sdh, logical block 149
Buffer I/O error on device sdh, logical block 150
Buffer I/O error on device sdh, logical block 151
Buffer I/O error on device sdh, logical block 152
Buffer I/O error on device sdh, logical block 153
Buffer I/O error on device sdh, logical block 154
 sdh:
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
sd 9:0:0:1: [sdh] Media Changed
sd 9:0:0:1: [sdh]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 9:0:0:1: [sdh]  Sense Key : Unit Attention [current] 
sd 9:0:0:1: [sdh]  Add. Sense: Power on, reset, or bus device reset occurred
sd 9:0:0:1: [sdh] CDB: Read(10): 28 20 00 00 04 90 00 00 48 00
end_request: I/O error, dev sdh, sector 1168
 sdh:
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
sd 9:0:0:1: [sdh] Media Changed
sd 9:0:0:1: [sdh]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 9:0:0:1: [sdh]  Sense Key : Unit Attention [current] 
sd 9:0:0:1: [sdh]  Add. Sense: Power on, reset, or bus device reset occurred
sd 9:0:0:1: [sdh] CDB: Read(10): 28 20 00 00 04 90 00 00 48 00
end_request: I/O error, dev sdh, sector 1168
sd 9:0:0:0: [sdg] 24133632 512-byte logical blocks: (12.3 GB/11.5 GiB)
 sdg:
 sdh:
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
sd 9:0:0:0: [sdg] Media Changed
sd 9:0:0:0: [sdg]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 9:0:0:0: [sdg]  Sense Key : Unit Attention [current] 
sd 9:0:0:0: [sdg]  Add. Sense: Power on, reset, or bus device reset occurred
sd 9:0:0:0: [sdg] CDB: Read(10): 28 00 00 00 00 20 00 00 10 00
end_request: I/O error, dev sdg, sector 32
 sdg:
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
 sdh:
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
sd 9:0:0:1: [sdh] Media Changed
sd 9:0:0:1: [sdh]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 9:0:0:1: [sdh]  Sense Key : Unit Attention [current] 
sd 9:0:0:1: [sdh]  Add. Sense: Power on, reset, or bus device reset occurred
sd 9:0:0:1: [sdh] CDB: Read(10): 28 20 00 00 04 90 00 00 48 00
end_request: I/O error, dev sdh, sector 1168
 sdh:
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
sd 9:0:0:1: [sdh] Media Changed
sd 9:0:0:1: [sdh]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 9:0:0:1: [sdh]  Sense Key : Unit Attention [current] 
sd 9:0:0:1: [sdh]  Add. Sense: Power on, reset, or bus device reset occurred
sd 9:0:0:1: [sdh] CDB: Read(10): 28 20 00 00 04 90 00 00 48 00
end_request: I/O error, dev sdh, sector 1168
 sdg:
 sdh:
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
sd 9:0:0:1: [sdh] Media Changed
sd 9:0:0:1: [sdh]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 9:0:0:1: [sdh]  Sense Key : Unit Attention [current] 
sd 9:0:0:1: [sdh]  Add. Sense: Power on, reset, or bus device reset occurred
sd 9:0:0:1: [sdh] CDB: Read(10): 28 20 00 00 04 90 00 00 48 00
end_request: I/O error, dev sdh, sector 1168
 sdg:
 sdh:
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
sd 9:0:0:0: [sdg] Media Changed
sd 9:0:0:0: [sdg]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 9:0:0:0: [sdg]  Sense Key : Unit Attention [current] 
sd 9:0:0:0: [sdg]  Add. Sense: Power on, reset, or bus device reset occurred
sd 9:0:0:0: [sdg] CDB: Read(10): 28 00 00 00 00 20 00 00 48 00
end_request: I/O error, dev sdg, sector 32
 sdg:
 sdh:
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
sd 9:0:0:1: [sdh] Media Changed
sd 9:0:0:1: [sdh]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 9:0:0:1: [sdh]  Sense Key : Unit Attention [current] 
sd 9:0:0:1: [sdh]  Add. Sense: Power on, reset, or bus device reset occurred
sd 9:0:0:1: [sdh] CDB: Read(10): 28 20 00 00 04 90 00 00 48 00
end_request: I/O error, dev sdh, sector 1168
quiet_error: 56 callbacks suppressed
Buffer I/O error on device sdh, logical block 146
Buffer I/O error on device sdh, logical block 147
Buffer I/O error on device sdh, logical block 148
Buffer I/O error on device sdh, logical block 149
Buffer I/O error on device sdh, logical block 150
Buffer I/O error on device sdh, logical block 151
Buffer I/O error on device sdh, logical block 152
Buffer I/O error on device sdh, logical block 153
Buffer I/O error on device sdh, logical block 154
sd 9:0:0:0: [sdg] Device not ready
sd 9:0:0:0: [sdg]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 9:0:0:0: [sdg]  Sense Key : Not Ready [current] 
sd 9:0:0:0: [sdg]  Add. Sense: Medium not present
sd 9:0:0:0: [sdg] CDB: Read(10): 28 00 00 00 01 a8 00 00 08 00
end_request: I/O error, dev sdg, sector 424
Buffer I/O error on device sdg, logical block 53
sd 9:0:0:0: [sdg] Device not ready
sd 9:0:0:0: [sdg]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 9:0:0:0: [sdg]  Sense Key : Not Ready [current] 
sd 9:0:0:0: [sdg]  Add. Sense: Medium not present
sd 9:0:0:0: [sdg] CDB: Read(10): 28 00 00 00 02 00 00 00 08 00
end_request: I/O error, dev sdg, sector 512
sd 9:0:0:0: [sdg] Device not ready
sd 9:0:0:0: [sdg]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 9:0:0:0: [sdg]  Sense Key : Not Ready [current] 
sd 9:0:0:0: [sdg]  Add. Sense: Medium not present
sd 9:0:0:0: [sdg] CDB: Read(10): 28 00 00 00 00 20 00 00 08 00
end_request: I/O error, dev sdg, sector 32
sd 9:0:0:0: [sdg] Device not ready
sd 9:0:0:0: [sdg]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 9:0:0:0: [sdg]  Sense Key : Not Ready [current] 
sd 9:0:0:0: [sdg]  Add. Sense: Medium not present
sd 9:0:0:0: [sdg] CDB: Read(10): 28 00 00 00 10 00 00 00 08 00
end_request: I/O error, dev sdg, sector 4096
sdg: detected capacity change from 12356419584 to 0
 sdh:
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
sd 9:0:0:1: [sdh] Media Changed
sd 9:0:0:1: [sdh]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 9:0:0:1: [sdh]  Sense Key : Unit Attention [current] 
sd 9:0:0:1: [sdh]  Add. Sense: Power on, reset, or bus device reset occurred
sd 9:0:0:1: [sdh] CDB: Read(10): 28 20 00 00 04 90 00 00 48 00
end_request: I/O error, dev sdh, sector 1168
 sdh:
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
sd 9:0:0:1: [sdh] Device not ready
sd 9:0:0:1: [sdh]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 9:0:0:1: [sdh]  Sense Key : Not Ready [current] 
sd 9:0:0:1: [sdh]  Add. Sense: Medium not present
sd 9:0:0:1: [sdh] CDB: Read(10): 28 20 00 00 04 90 00 00 48 00
end_request: I/O error, dev sdh, sector 1168
sd 9:0:0:1: [sdh] Device not ready
sd 9:0:0:1: [sdh]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 9:0:0:1: [sdh]  Sense Key : Not Ready [current] 
sd 9:0:0:1: [sdh]  Add. Sense: Medium not present
sd 9:0:0:1: [sdh] CDB: Read(10): 28 20 00 00 04 90 00 00 08 00
end_request: I/O error, dev sdh, sector 1168
sd 9:0:0:1: [sdh] Device not ready
sd 9:0:0:1: [sdh]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 9:0:0:1: [sdh]  Sense Key : Not Ready [current] 
sd 9:0:0:1: [sdh]  Add. Sense: Medium not present
sd 9:0:0:1: [sdh] CDB: Read(10): 28 20 00 00 00 18 00 00 08 00
end_request: I/O error, dev sdh, sector 24
sd 9:0:0:1: [sdh] Device not ready
sd 9:0:0:1: [sdh]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 9:0:0:1: [sdh]  Sense Key : Not Ready [current] 
sd 9:0:0:1: [sdh]  Add. Sense: Medium not present
sd 9:0:0:1: [sdh] CDB: Read(10): 28 20 00 00 00 18 00 00 08 00
end_request: I/O error, dev sdh, sector 24

Cuando intento listar la carpeta Root, obtengo:

ls: cannot access /media/3CB1-07D3/Samsung: Input/output error
ls: cannot access /media/3CB1-07D3/LOST.DIR: Input/output error
ls: cannot access /media/3CB1-07D3/external_sd: Input/output error
ls: cannot access /media/3CB1-07D3/usbStorage: Input/output error
...

Intenté restablecer el modo de conexión USB mediante PhoneUtil pero eso no ayudó. Intenté montar manualmente el teléfono con el mismo resultado.

Entonces intenté activar la depuración USB . En este caso, el syslog dice:

usb 1-1.5: new high speed USB device number 11 using ehci_hcd
scsi10 : usb-storage 1-1.5:1.0
Jan 11 10:24:23 host mtp-probe: checking bus 1, device 11: "/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5"
Jan 11 10:24:23 host mtp-probe: bus: 1, device: 11 was not an MTP device
cdc_acm 1-1.5:1.1: This device cannot do calls on its own. It is not a modem.
cdc_acm 1-1.5:1.1: ttyACM0: USB ACM device
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
Jan 11 10:24:24 host modem-manager[1288]: <info>  (ttyACM0) opening serial port...
scsi 10:0:0:0: Direct-Access     Android    UMS Composite    00 PQ: 0 ANSI: 2
scsi 10:0:0:1: Direct-Access     Android    UMS Composite    00 PQ: 0 ANSI: 2
sd 10:0:0:0: Attached scsi generic sg7 type 0
sd 10:0:0:1: Attached scsi generic sg8 type 0
sd 10:0:0:0: [sdg] Attached SCSI removable disk
sd 10:0:0:1: [sdh] Attached SCSI removable disk

Al intentar montar /dev/sdg Me sale mount: no medium found on /dev/sdh

Recuerdo vagamente que una vez funcionó utilizando el modo de almacenamiento USB. Mientras tanto, he instalado una actualización del firmware. ¿Alguna idea de lo que podría probar a continuación?

Preguntas no relacionadas:

Preguntado el 11 de Enero, 2012 por Aaron Digulla

Respuestas

¿Demasiados anuncios?

1voto

user42276 avatar
user42276 Puntos 362

Tu Ubuntu está muy desactualizado. 12.03 12.10. 13.04. 13.10 14.04 son todas las versiones más nuevas de Ubuntu.Utilice 14.04 o más reciente cuando sea posible

Desde el 13 los problemas con mi S2 sdcard son casi inexistentes

Respondido el 21 de Marzo, 2014 por user42276 (362 Puntos )

0voto

VWCamperFan avatar
VWCamperFan Puntos 16

Apenas recuerdo síntomas similares causados por una tarjeta SD defectuosa, pero eso no explica los problemas con ambos dispositivos virtuales. ¿Probaste con un cable diferente y un puerto USB diferente en el lado del ordenador? Sólo para asegurarse de que el problema no es causado por una mala conexión de cable ...

Respondido el 2 de Noviembre, 2012 por VWCamperFan (16 Puntos )

0voto

user53872 avatar
user53872 Puntos 1

Espero que estés activando el modo de transferencia USB en las opciones USB del S2. A mí me funciona bien así. Más ajustes > utilidades USB > almacenamiento masivo.

Respondido el 16 de Febrero, 2014 por user53872 (1 Puntos )

Preguntas relacionadas

Preguntas Destacadas

Etiquetas mas usadas

En nuestra red

PreguntAndroid.com

PreguntAndroid es una comunidad de usuarios de Android en la que puedes resolver tus problemas y dudas.
Puedes consultar las preguntas de otros usuarios, hacer tus propias preguntas o resolver las de los demás.

Powered by:

Yandex
X