Quiero construir una imagen de Android en mi Nexus 5, pero los dispositivos adb no puede detectar el dispositivo. Creo que tengo un problema de acceso USB en mi portátil. Cuando conecto el dispositivo, no se conecta. Aquí están algunas salidas de los diversos comandos que se sugirieron cuando lo busqué en Google:
-
lsusb -t:
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 5000M /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/9p, 480M /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/2p, 480M |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/8p, 480M -
sudo fdisk -l
Attention : identifiant de table de partitions GPT (GUID) détecté sur « /dev/sda » ! L'utilitaire fdisk ne prend pas GPT en charge. Utilisez GNU Parted. Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 têtes, 63 secteurs/piste, 121601 cylindres, total 1953525168 secteurs Unités = secteurs de 1 * 512 = 512 octets Taille de secteur (logique / physique) : 512 octets / 4096 octets taille d'E/S (minimale / optimale) : 4096 octets / 4096 octets Identifiant de disque : 0x8c377765 Périphérique Amorçage Début Fin Blocs Id. Système /dev/sda1 1 1953525167 976762583+ ee GPT La partition 1 ne commence pas sur une frontière de cylindre physique. -
dmesg | tail conecte el usb dmesg | tail -n 20: aquí está la diferencia entre los 2 comandos anteriores:
[ 2919.365968] [UFW BLOCK] IN=wlan0 OUT= MAC=01:00:5e:00:00:01:c4:2c:03:2f:2d:54:08:00 SRC=141.223.83.156 DST=224.0.0.1 LEN=44 TOS=0x00 PREC=0x00 TTL=1 ID=63097 PROTO=UDP SPT=64283 DPT=8612 LEN=24 [ 2939.662014] [UFW BLOCK] IN=wlan0 OUT= MAC=01:00:5e:00:00:01:c4:2c:03:2f:2d:54:08:00 SRC=141.223.83.156 DST=224.0.0.1 LEN=44 TOS=0x00 PREC=0x00 TTL=1 ID=9057 PROTO=UDP SPT=54364 DPT=8612 LEN=24 [ 2954.005896] [UFW BLOCK] IN=wlan0 OUT= MAC=01:00:5e:00:00:01:c4:2c:03:2f:2d:54:08:00 SRC=141.223.83.156 DST=224.0.0.1 LEN=44 TOS=0x00 PREC=0x00 TTL=1 ID=65052 PROTO=UDP SPT=61778 DPT=8612 LEN=24 [ 2975.324471] [UFW BLOCK] IN=wlan0 OUT= MAC=01:00:5e:00:00:01:c4:2c:03:2f:2d:54:08:00 SRC=141.223.83.156 DST=224.0.0.1 LEN=44 TOS=0x00 PREC=0x00 TTL=1 ID=21456 PROTO=UDP SPT=59758 DPT=8612 LEN=24 [ 2996.844609] [UFW BLOCK] IN=wlan0 OUT= MAC=01:00:5e:00:00:01:c4:2c:03:2f:2d:54:08:00 SRC=141.223.83.156 DST=224.0.0.1 LEN=44 TOS=0x00 PREC=0x00 TTL=1 ID=58470 PROTO=UDP SPT=55238 DPT=8612 LEN=24
4.dispositivos-usb
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 2
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev=03.13
S: Manufacturer=Linux 3.13.0-55-generic ehci_hcd
S: Product=EHCI Host Controller
S: SerialNumber=0000:00:1d.0
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 8
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=8087 ProdID=8000 Rev=00.04
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 9
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev=03.13
S: Manufacturer=Linux 3.13.0-55-generic xhci_hcd
S: Product=xHCI Host Controller
S: SerialNumber=0000:00:14.0
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=5000 MxCh= 4
D: Ver= 3.00 Cls=09(hub ) Sub=00 Prot=03 MxPS= 9 #Cfgs= 1
P: Vendor=1d6b ProdID=0003 Rev=03.13
S: Manufacturer=Linux 3.13.0-55-generic xhci_hcd
S: Product=xHCI Host Controller
S: SerialNumber=0000:00:14.0
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hubGracias por su ayuda :)
